Holtkotter (Holtkoetter) Lichtstar System

Holtkotter (Holtkoetter) Single Canopy C8410 R with Reflector Halogen Ceiling Spot Lights

LICHTSTAR System

C8410 R-5900
Square Canopy with Four Quick Connect Spotlights

Assembly Instructions for LICHTSTAR Canopies

1. Once the LICHTSTAR canopy has been installed, the quick-connect feature completes the fixture.
2. Be sure to discard the nut (A) removed from the canopy and universal backplate assembly, referred to in Step 2 under the Mounting Instructions. This will allow access to the threaded stem (G) at the center of the canopy.
3. Insert the plug (E), located at the end of the cable or reflector, into the center of the threaded stem (G).
4. Slide the finished stem (D) over the plug (E) and screw into place on the threaded stem (G).

CARE INSTRUCTIONS
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the outside of the brass may be damaged as a result. Enjoy your new Holtkötter lamp.