Under Counter, Task & Display
Mini Recessed & Pucks Linear Task Lights Flexible Light Strip Light Rope & Tape Light Mini Recessed NSL Collections
Under Counter and Task Step & Wall Lights Landscape & Architectural NSL Specialty Lighting Effects NSL Indoor/Outdoor Lighting

NSL LED Brite Strip

LED Brite Strip festoon bulb in a cove (dimmable)

NSL LED Brite Strip

Flexible field cutable parallel wired light strip with molded sockets located at two, three and four bulbs per foot uses easy snap in festoon bulbs.

LED Brite Strip
LBL Brite Strip

0.5 watt festoon bulbs.
Safe 24 volt remote power supply powers up to 180 sockets per LED Driver.
(Accessories, drivers and mounting options sold separately.)

Brite Strip
LBL Brite Strip

5 watt or 10 watt clear or frosted festoon or 20 watt MR11 bulbs.
Safe remote power supply powers up to 480 watts on a 24 volt system or 240 watts on a 12 volt system. NSL Brite Strip >
(Accessories, power supply and mounting options sold separately.)

Components in White or Black finish.

Optional Brite Strip Reflector increases light output over 50%.
Finish: Polished Brass, Bright Aluminum, Gloss White, Gloss Black

Brite Strip Fascia Extrusion shields Brite Strip from view while reflecting light toward appropriate surface.
Finish: Bright Aluminum, Gloss White

Use Brite Strip Cove Reflector to mounting cove molding and lighting in one step.
Finish: Pre-primed White

Indoor or Dry location.
Dimmable!

NSL LED Brite Strip

Flexible light strip featuring LED efficiency and field cutability. Molded festoon bulb sockets located at two, three and four bulbs per foot on listed 12AWG wire. Each socket accepts a 0.5 watt LED festoon bulb. Bulbs are rated at 40,000 hour life. Light strip is dimmable with 0.5 watt festoon bulbs powered by appropriate LED driver and dimming device. See instructions for complete Specifications and installation details.

Applications

  • Ceiling Coves
  • Wall Coves
  • Display Cases
  • Under Cabinet Lighting
  • Shelf Lighting
  • Sign Backlighting
  • Architectural Accents
  • Decorative Accents

Features:

  • Field cutable power strip for custom, hard to estimate applications
  • Flexible design allows unlimited applications
  • Parallel wiring means loss of a bulb does not affect remaining strip
  • Listed 12 AWG wire
  • Simple, safe, effective standard terminal block connector with Junction Box
  • Socket is Pre-installed on wire for installation ease
  • Snap-in bulb socket design for ease of bulb replacement
  • Easy to mount
  • Each socket ships complete with 3M double sided mounting tape
  • Optional nail clips for difficult mounting applications
  • Fascia extrusion, strip reflector and cove reflector available
  • Low 0.5 watts per LED festoon bulb
  • Rated 40,000 hour LED life
  • Festoon bulbs dim with appropriate LED driver and dimmer.

Above: Brite Strip in Fascia Extrusion to light work station.
Below: Light Rope in Fascia Extrusion lights display cabinet.

NSL Brite Strip Fascia Extrusion

Combines with Brite Strip, LED Brite Strip, or LED eStrip to create a versatile linear light fixture that is easily attached to almost any surface.

Each extrusion ships completely pre-assembled and ready to affix to mounting surface, just snap in seleced Brite Strip, LED Brite Strip, or LED eStrip. Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8".

Applications

  • Cabinets
  • Shelves
  • Display Accents
  • Any soft reflective light application

Features

  • Custom profile shields Brite Strip or Light Rope from view while reflecting light toward appropriate surface
  • Sold in three colors: Aluminum, Bronze and White
  • Aluminum offers the greatest reflectivity
  • White acts like a primer to allow on-site custom paint matching
  • "Tru-form" PVC mounting channel and 3M double-sided tap included with every section
  • Sold in 4 foot lengths. Custom cuts for pieces less than 4 feet available


Fascia Extrusion

Ships completely pre-assembled and ready to affix to mounting surface, just snap in selected Brite Strip, LED Brite Strip, or LED eStrip. Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8". Sold in 4' sections. Custom cuts available. Can be used as an accessory with LED eStrip.



Above: Light Rope in Reflector above cabinets.
Below: Light Rope in Reflector below bar.

NSL Brite Strip Reflector

Soft, warm illumination - increases light output over 50%

Each extrusion ships completely pre-assembled and ready to affix to mounting surface. Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8".

Applications

  • Cove lighting
  • Cabinets
  • Counters
  • Shelves
  • Displays
  • Eaves
  • Tables

Features

  • Polished brass adds a "golden" tone to reflected light
  • Bright aluminum gives maximum reflected light
  • Reflectors can be used with either 3/8" or 1/2" diameter Light Rope. Please specify with order
  • Sold in 4 foot lengths only. Custom cutting for pieces less than 4 feet available.
  • Available for Brite Strip, LED Brite Strip, or LED eStrip.


Brite Strip Reflector Extrusion

Extrusion with 3M doubled-sided tape applied to back. Ready to mount & attach Brite Strip to. Does not include any Brite Strip or accessories.

BLF-4-BA, BLF-4-PB BLF-4-GW, BLF-4-GB
PB=Polished Brass, BA=Bright Aluminum, GW=Gloss White, GB=Gloss Black

Sold in 4' lengths only. Custom cutting for pieces less than 4' available at no charge.


Brite Strip with Reflector

Brite Strip in Cove Reflector -
View from Above and Below

NSL Brite Strip Cove Reflector

One-step solution to mounting cove molding and lighting.

Ships without double-sided tape as screws or drywall anchors will work better with this reflector. Once you have mounted reflector, just attach Brite Strip, LED Brite Strip, or LED eStrip in the center of pre-engineered reflector section.

Application

  • Cove lighting

Features

  • An aluminum extrusion in the shape of a standard cove molding, with a white gloss mounting area for the illumination system.
  • Pre-engineered with appropriate bulb side clearances.
  • Pre-primed in white for ease of wall match painting and interior reflective qualities.
  • Cove reflector can be used with Brite Strip or LED Brite Strip for the brightest illumination, LED eStrip or Light Rope for a more subtle illumination.
  • Sold in 4 foot lengths only. Custom cutting for pieces less than 4 feet available.


Cove Reflector

Sold only in 4' lengths. Custom cutting available at no charge.
Does not include any Brite Strip, LED eStrip or Light Rope accessories.

LED Brite Strip    
Custom Cuts    

LBL-2-XX/(color) 2 LED sockets per foot
Specify White or Black
LBL-3-XX/(color) 3 LED sockets per foot
Specify White or Black
LBL-4-XX/(color) 4 LED sockets per foot
Specify White or Black

Each custom cut of LED Brite Strip must ship with a BL-001/WH or BL-001/BK assembly kit
(see Accessories below).
90 watt maximum run. LED Brite Strip requires NSL LED Driver Model #LEDDR-24-100W.
There is a custom fee per cut.

100' Spool    

LBL-2-100/(color) 2 LED sockets per foot
Specify White or Black
LBL-3-100/(color) 3 LED sockets per foot
Specify White or Black
LBL-4-100/(color) 4 LED sockets per foot
Specify White or Black
All 100' spools come with 10 terminal block connectors, 10 end caps, and 10 junction boxes. LEDs must be ordered separately.
90 watt maximum. LED Brite Strip requires NSL LED Driver Model #LEDDR-24-100W
Accessories    
BL-001/(color)

Brite Strip Connector Assembly Kit
Specify White or Black

Includes: Junction Box, terminal block, end cap
2.2"L X 1.8"W X 1"H

Each custom cut of LED Brite Strip must ship with a BL-001/WH or BL-001/BK assembly kit.

LW-12G/(color)

12 Gauge Lead Wire
Specify White or Black

To be used from LED Brite Strip to LED Driver.

BL-003/(color) Brite Strip End Cap
Specify White or Black

BL-005/(color)

12 Gauge Wire Clips with Nails (30 nails, 30 clips per bag)
Select black or white

Brite Strip Reflector  

BLFAS-4-(color)

Brite Strip Reflector Extrusion
BLF-4-BA, BLF-4-PB BLF-4-GW, BLF-4-GB
PB=Polished Brass, BA=Bright Aluminum, GW=Gloss White, GB=Gloss Black

Sold in 4' lengths only. Custom cutting for pieces less than 4' available.

Brite Strip Fascia Extrusion  

BLFAS-4-(color)

Fascia extrusion with 3M double sided tape applied to back. Ready to mount and attach Brite Strip to.

BA=Bright Aluminum, GW=Gloss White

Sold in 4' Lengths only. Custom cutting for pieces less than 4' available at no charge. Brite Strip and accessories sold separately.

Brite Strip Cove Reflector  

BLCOVE-4-GW

Cove Reflector BLCOVE-4-GW
Sold in 4' lengths only.
Custom cutting for pieces less than 4' available.

Pre-primed White, Brite Strip Cover Reflector. Ships without double-sided tape as screws or drywall anchors will work better with this reflector. Once you have mounted reflector, just attach Brite Strip, LED Brite Strip, or LED eStrip in the center of pre-engineered reflector section. Sold only in 4' lengths. Custom cutting available at no charge. Does not include any Brite Strip, LED Brite Strip, or LED eStrip accessories.

Brite Strip Bulbs  
LED Brite Strip Bulbs LED Festoon Bulbs

LBL-24-.5WW 24V, 0.5 watt Festoon LED , Warm White
LED Drivers - Non Dimmable
LEDDR-24-120W Power up to 180 LED Festoon bulbs.
24VDC, 120W, Class 2 Hardwire LED Driver, 2 circuits at 60W each.
RU Listed for indoor and outdoor usage. Includes 18AWG waterproof strain relief. For use with LED eStrip, LED Mini Star and LED Brite Strip.
11.6" (L) x 3.6" (W) x 2.25" (H).
LED Drivers - Dimmable

24VDC, 20-96W, Class2
6.6" x 3.75" x 2.3"

TR24L20DC 24VDC, 20 watt, DIMMABLE magnetic transformer. Hard wire connection only.
Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part No. ED-LV/W or I-480).
Powers and dims 16-32 LED Festoon bulbs (NSL Part No. LBL-24-.5WW)
TR24L40DC 24VDC, 40 watt, DIMMABLE magnetic transformer. Hard wire connection only.
Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part No. ED-LV/W or I-480).
Powers and dims 30-60 LED Festoon bulbs (NSL Part No. LBL-24-.5WW)
TR24L60DC 24VDC, 60 watt, DIMMABLE magnetic transformer. Hard wire connection only.
Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part No. ED-LV/W or I-480).
Powers and dims 50-100 LED Festoon bulbs (NSL Part No. LBL-24-.5WW)
TR24L96DC 24VDC, 96 watt, DIMMABLE magnetic transformer. Hard wire connection only.
Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part No. ED-LV/W or I-480).
Powers and dims 80-160 LED Festoon bulbs (NSL Part No. LBL-24-.5WW)

LEDDR-24-100

Wiring Example for LED Brite Strip

A maximum total of: 125 0.72 watt LED festoon bulbs

24VDC, Requires NSL LED Driver Model #LEDDR-24-100W

Dimmable Transformers Min. 0.5W Bulbs Max. 0.5W Bulbs
TR24L20DC 16 32
TR24L40DC 30 60
TR24L60DC 50 100
TR24L96DC 80 160

Wiring Schematic



Brite Strip

  • Sockets pre-installed on wire for installation ease
  • Snap in bulb for ease of bulb replacement

Non Dimmable Layout

Specifications

 
Voltage 24VDC
LED Bulb Specifications 0.5W LED Festoon (dimmable)
LED Color Temperature 2600K +/- 200K
LED Bulb Life Replaceable LED bulbs rated at 40,000 hours
Socket Spacing 1" between bulb sockets (4 bulbs per foot)
2" between bulb sockets (3 bulbs per foot)
4" between bulb sockets (2 bulbs per foot)
Socket Connection Horizontal individual sockets parallel wired to flat 12AWG power wire.
Wire and Socket Color White or Black
Maximum Single Run LED Festoon Bulbs: 180 bulbs with LEDDR-24-120W non-dimmable driver, or 160 bulbs with TR24L96DC dimmable magnetic transformer.
Dimming 0.5W LED Festoon bulbs are dimmable with appropriate magnetic LED driver and dimmer. See instructions for details.
Agency Approval ETL listed for indoor and other dry location use.
Warranty Two years.

Photometrics: Cove Application - LED

LED eStrip (Model # LES-3-WW 3 ft.)
Lumens = 166 l Watts = 2.88

LED Brite Strip (Model # BLF-4-WW 2 ft)
Lumens = 200 l Watts = 4.16

Related Pages


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791