Tech Lighting Kable Lite

Tiella 800CBL5P Accent 5-Light Cable Kit

Tiella Accent 5-Light Cable Kits on Amazon

Accent Rail Kit (5 Head) Cable Kit with 5 Accent Heads, Matte Nickel, lamps included

Accent Cable Kit 5 Head
100 Watt surface transformer mounts to a standard 4" square junction box with round plaster ring (provided by electrician).

Turnbuckles and anchors can be mounted to the walls or ceiling. When ceiling mounting kit, cables will drop 2" below ceiling. Includes five highly Adjustable Accent heads (20 Watts max each) that tilt between the cables and rotate 120° within their rings. The kit may be dimmed with a standard Incandescent dimmer.

Use maximum 12 volt, 20 watt, MR16 halogen bulbs with this kit.

Finish: Matte Nickel

What's in the box?

(1) 100 Watt surface transformer
(2) turnbuckles (can be mounted to the walls or ceiling)
(2) pieces of cable
(2) mounting posts
(5) Accent Head fixtures
(5) 20 watt MR16 bulbs
(5) snap rings
mounting hardware

Tech Lighting Kable Kits

Simplify your design by starting with a Tech Lighting Kable Kit. Cables can be separated from 2" to 36". Choose any lights or pendants to complete you custom Kable Lite.

You can further customize your design with additional cable, Standoffs and Supports from walls or ceiling to create longer runs or change directions.

All Kable Kits include:

45' of Bare Cable
Enough for a twenty foot wall-to-wall run.
#10 gauge, tinplated copper cable with a kevlar core. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Two Pairs of Slimline Turnbuckles
Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. For short, straight runs (runs under 20'). Mount to wall or ceiling. When ceiling mounted, cables drop 1" from ceiling.

Magnetic Transformer with Power Feed
Choose a 12 volt 150 watt surface transformer, 300 watt surface transformer or 300 watt remote transformer kit.

Tech Lighting 700KLKTS150, 700KLKTS300 Surface Transformer Kable Kits

Tech Lighting Cable Transformers on Amazon

150 Watt Surface Transformer Kable Kit
700KLKTS150C Chrome
700KLKTS150CW White with Chrome
700KLKTS150S Satin Nickel
700KLKTS150SW White with Satin Nickel

3 or 4 pendants or lights.
Add up to three 50 watt elements or up to four 35 or 37 watt elements.

300 Watt Surface Transformer Kable Kit700KLKTS300C Chrome
700KLKTS300CW White with Chrome
700KLKTS300S Satin Nickel
700KLKTS300SW White with Satin Nickel

Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Surface Transformer mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire feeds.

Includes 45' of bare cable (enough for a twenty foot wall-to-wall run), two pairs of slimline turnbuckles and a 12 volt 150 watt or 300 watt surface magnetic transformer.

Finish: Chrome, Satin Nickel, White with Chrome, White with Satin Nickel

Tech Lighting Remote Transformer Kable Kits

Tech Lighting Remote Transformers on Amazon

300 Watt Remote Transformer Kable Kit
700KLKTA300C Chrome
700KLKTA300S Satin Nickel

Up to 6 pendants or lights.
Add up to six 50 watt elements or up to eight 35 or 37 watt elements.

Magnetic Remote Transformer installs in an accessible location behind the ceiling or wall. Canopy mounts to a standard 4" junction box with round plaster ring (provided by electrician) and includes 24" softwire leads.

Includes 45' of bare cable (enough for a twenty foot wall-to-wall run), two pairs of slimline turnbuckles, a power feed canopy and a 12 volt 300 watt remote magnetic transformer.

Finish: Chrome or Satin Nickel

700KLABAREC KL-bare cable, tin-plate

Tech Lighting Kable Lite Cable on Amazon

Bare cable is #10 gauge tinplated copper cable. Rated for 300 watts at 12 volts, 600 watts at 24 volts. Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

700KLAINSCL KL-insulated cable, clear

Insulated cable is #10 gauge, tinplated copper cable sheathed in clear insulation. Use insulated cable where required by local codes or in coastal areas, where salty air might corrode bare cables.

Rated for 300 watts at 12 volts, 600 watts at 24 volts.
Load: 300 watt maximum at 12 volts to 30' before voltage drop occurs; 600 watt maximum at 24 volts to 60' before voltage drop occurs.

Cable is sold by the foot (0.3 m).
Order the length of the Kable Lite run x 2 and add 10 percent to feed through turnbuckles.

Tech Lighting Cable Connectors

700PARTD1 Isolating Connectors
Dead End Connectors join cables end to end without electrical connectivity.

700PARTD2 Conductive Connectors
Connectors join cables end to end with electrical connectivity.

Finish: Chrome or Satin Nickel

For Long or Turning Runs - Wall or Ceiling Mounted

KL-Universal Turnbuckles

700PARTTC Chrome
700PARTTS Satin Nickel

5.5" long, 1.75" diameter. When ceiling mounted, cables drop 2.5" from ceiling. Pair. If mounting to metal, order isolating connector for each pair of turnbuckles (sold separately).

Finish: Chrome or Satin Nickel

For Runs Under 20' - Ceiling Mounted Only

KL-Wave Turnbuckles

700KWAVEC Chrome
700KWAVES Satin Nickel

Use on both ends of the run. For ceiling only. Cables drop 5" from ceiling. Pair. If mounting to metal, order isolating connectors for each pair of turnbuckles (sold separately).

Finish: Chrome or Satin Nickel

For Short, Straight Runs - Wall to Wall or Ceiling Mounted

700PRTT1C KL-Slimline Turnbuckles
700PRTT1C Chrome
700PRTT1IC Chrome Isolating
700PRTT1S Satin Nickel
700PRTT1IS Satin Nickel Isolating

Slimline Turnbuckles 700PRTT1
4" long, 0.5" diameter. When ceiling mounted, cables drop 1" from ceiling. Pair. If mounting to metal, order isolating version.

Finish: Chrome or Satin Nickel

Maintaining Tension in Turn-heavy Runs

Tech Lighting 700PARTT2, 700PARTT3 Inline Turnbuckles

700PARTT2C Chrome
700PARTT3C Chrome Isolating
700PARTT2S Satin Nickel
700PARTT3S Satin Nickel Isolating

Kable Lite systems with several turns will require inline turnbuckles to provide tension within the run.
inline turnbuckles.
Conductive (T2) turnbuckles continue power; insulated (T3) turnbuckles isolate power feeds from each other. Pair.

Finish: Chrome or Satin Nickel

Slimline Anchors 700PRTT0 KL-Slimline anchors

700PRTT0C Chrome
700PRTT0S Satin Nickel

Use to secure cables at one end of run (with turnbuckles at other end). 1" long, 0.5" diameter. Pair.

Finish: Chrome or Satin Nickel

Soft Turnbuckles 700KSOFTTS KL-Soft Turnbuckles

700KSOFTTS Satin Nickel

Stylish satin nickel turnbuckle. 4" long, 0.5" diameter. When ceiling mounted, cables drop 1" from ceiling. Pair. If mounting to metal, order isolating connectors for each pair of turnbuckles (sold separately).

Finish: Satin Nickel

Soft Anchors 700KSOFT0S KL-Soft anchors

700KSOFT0S Satin Nickel

Use to secure cables at one end of run (with turnbuckles at other end). 1" long, 0.5" diameter. Pair.

Finish: Satin Nickel

Mounting to Cable Lights to Brick, Cement or Plaster

700PRTD14 Brick/Cement Anchors

700PRTD15 Plaster Anchors

Turnbuckles and anchors come standard with mounting hardware for drywall. To mount to other surfaces, order this special hardware. Sold in pairs.

Supporting Runs Over 20 Feet - Adjustable Standoff

KL-Adjustable Standoff 12'
700PRTD3C Chrome
700PRTD3S Satin Nickel

KL-Adjustable Standoff 30'
700PRTD33C Chrome
700PRTD33S Satin Nickel

Length: 12' or 30'

Finish: Chrome or Satin Nickel

Suspension cable virtually disappears for a clean and elegant look. Wire grip allows easy adjustability. Standard with twelve feet of field-cuttable suspension cable; may also be specified with thirty feet of cable. Horizontal rod is 12" wide; field cut to desired cable separation (3.5" minimum).

Supporting Runs Over 20 Feet or Changing Cable Drop - Rigid T Standoff

Rigid T Standoff

700KTSO0103 1" Drop 3.5" Cable Separation
700KTSO0105 1" Drop 5.5" Cable Separation
700KTSO0108 1" Drop 8" Cable Separation

700KTSO0203 2.5" Drop 3.5" Cable Separation
700KTSO0205 2.5" Drop 5.5" Cable Separation

700KTSO0503 5" Drop 3.5" Cable Separation
700KTSO0505 5" Drop 5.5" Cable Separation
700KTSO0508 5" Drop 8" Cable Separation

700KTSO1201 12" Drop 1" Cable Separation
700KTSO1202 12" Drop 2" Cable Separation

Mounts to ceiling. Offered for a range of drops and cable separations. Not field-cuttable.

Drop: 1", 2.5", 5", 12"
Separation: 1", 2", 3.5", 5.5", 8"

Finish: Chrome or Satin Nickel

Changing Cable Drop or Turning - Rigid Post Standoff/Standoff Turn

Rigid Post Standoff 700KSO

700KSO01S Drop 1"

Rigid Post Standoff Turn 700KSOT

700KSOT Choose from 1", 2.5", 5", 12" Drop from

Can be used for cable separations from 2" to 36". Standoffs can also be specified with a turn support to provide tension for clean turns. Pair. Not field-cuttable.

Drop: 1", 2.5", 5", 12"

Finish: Chrome or Satin Nickel

Kable Lite Wall Turn 700KWSO01

700KWSO01C Chrome
700KWSO01S Satin Nickel

A wall turn attaches to a surface to make simple turns. Includes insulating tubing to cover where cables cross. Pair.

Finish: Chrome or Satin Nickel

Kable Lite Horizontal Turn 700PRTC6

700PRTC6C Chrome
700PRTC6S Satin Nickel

Directional hardware for making a floating horizontal turn when the ceiling is inaccessible. Includes six feet of field-cuttable cable to provide tension for turn.

Finish: Chrome or Satin Nickel

Installing Cable to Cantilever from a Wall

Outside Rigger 700KWSO1202

700KWSO1202C Chrome
700KWSO1202S Satin Nickel

This outside rigger attaches to the wall to secure cables 12" from the wall at 2" cable separation. Use when a wall-to-wall installation is impractical and the ceiling is not accessible. Not field-cuttable. Pair.

Finish: Chrome or Satin Nickel

Tech Lighting 700PARTD9, 700PARTD4 Cris-Crossing Cable Runs

700PARTD9 Power Jumpers

700PARTD9C Chrome
700PARTD9S Satin Nickel

Pair of power jumpers transfers power from one cable run to another. Includes 24" of insulating tubing to cover where cables cross.

Insulating Tubing

700PARTD4 Insulating Tubing

Clear plastic tubing insulates bare cable from another cable or metal. Sold by the foot.

Tech Lighting 700KSOHD18, 700KSOHD24 Supporting Cable on Runs with Longer Drops

700KSOHD18 KL-Heavy Duty Standoff 18" pair

700KSOHD18C Chrome
700KSOHD18S Satin Nickel

700KSOHD24 KL-Heavy Duty Standoff 24" pair

700KSOHD24C Chrome
700KSOHD24S Satin Nickel

Use these heavy duty standoffs to support Kable Lite systems that drop 18" or 24" from the ceiling.
These longer standoffs have 4" diameter bases for stability and require a minimum 5.5" cable separation. Pair.
Not field-cuttable. May require longer hardwire feeds.

Finish: Chrome or Satin Nickel

Tech Lighting K-Bye-Bye Head 700KBYENC

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

Tech Lighting K-Hello 700KHELLO

Highly Adjustable head tilts between cables and rotates 140° within its ring. Integral louver lens holder can hold glass lens (sold separately) or eggcrate louver (included). Satin aluminum finish. Specify low-voltage, MR16 lamp of up to 50 watts or AR111 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only
Cable Separation: 3", 5" or 6"

Tech Lighting K-Giro 700KGIR

700KGIR05 K-Giro Head 5"
700KGIR08 K-Giro Head 12"

K-Giro 700KGIR Choose Finish and Separation

Adjustable arms rotate individually. For cable separations of 3.5" to 8". Lamp rotates 360°. Satin aluminum finish. Low-voltage, MR16 lamp of to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Colored Lens, Dichroic Lens, Diffuser Lens, Eggcrate Louver, Linear Spread Lens, Round Glass Shield, Soft Focus Lens, UV Filter

Finish: Satin Aluminum only

Tech Lighting K-Jane 700KJAN

700KJAN05 K-Jane Head 5"
700KJAN12 K-Jane Head 12"
700KJAN24 K-Jane Head 24"
700KJAN36 K-Jane Head 36"

K-Jane 700KJAN Choose Finish and Separation

K-Jane drops below the cables; head pivots 220° on two axes. For cable separations of up to twice the length. Field-cuttable. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12" or 24"

Tech Lighting K-Johnny 700KJOH

700KJOH05 K-Johnny Head 5"
700KJOH12 K-Johnny Head 12"
700KJOH18 K-Johnny Head 18"
700KJOH24 K-Johnny Head 24"
700KJOH48 K-Johnny Head 48"
700KJOH144 K-Johnny Head 144"

K-Johnny 700KJOH Choose Finish and Length

Versatile, field-cuttable, with a pivoting head to direct the beam. low voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only. System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Length: 5", 12", 18", 24", 48", 144"

Tech Lighting K-Pivot 700KPIV

700KPIV01 K-Pivot Head 1"
700KPIV02 K-Pivot Head 2"
700KPIV03 K-Pivot Head 3.5"
700KPIV05 K-Pivot Head 5.5"
700KPIV08 K-Pivot Head 8"

K-Pivot 700KPIV Choose Finish and Length

Head swivels 220°, 2" to 8" versions pivot on horizontal axis, 1" version pivots on vertical axis only. Low-voltage, MR16 lamp of up to 75 watts (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum
Cable Separation: 1", 2", 3.5", 5.5", 8"

Tech Lighting K-Telescope 700KTEL16

700KTEL16 K-Telescope Head

K-Telescope 700KTEL16 Choose Finish

Arms telescope individually from 12" to 42", creating unlimited angles. For cable separations of 1" to 48". Head rotates 330° and has swivel and pivot action to direct the beam. Low-voltage, MR16 lamp of up to 75 watts, (not included). For Kable Lite system only.

System: Available for Kable Lite only.

Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap Louver Lens Holder, Taza Accessory

Finish: Chrome or Satin Aluminum

Tech Lighting Kable Lite Pendants

Pendants suspended from Tech Lighting Kable Lite or Monorail are an ideal way to light an island or counter. There are 42 different Pendants with color and finish options available for Tech Lighting Kable Lite System.

Tech Lighting Low Voltage Kable Pendants >

Tech Lighting Kable Lite FreeJack Connector 700KABCO

700KABCO Kable Lite FreeJack Connector

Finish: Satin Nickel or Chrome.

For cable separations of 8" or less. May be field cut to desired separation (2" minimum).

This connector allows any Tech Lighting Low Voltage Kable Pendants to be suspended between two cables.

Tech Lighting 700A1 Monorail Cord and Plug Option

700A1 Cord and Plug

Finishes: Black, White

Tech Lighting 700KPCEN, 700KPCEN4 Kable Lite Center Single Feed, Feed Dual Feed

700KPCEN
Kable Lite Center Power Feed Single Feed

700KPCEN4
Kable Lite Center Power Feed Dual Feed

A center power feed is generally used to bring power to a Kable Lite system when the transformer or junction box cannot be located directly above the run. The power feed can be mounted to a standard 4" junction box with round plaster ring (provided by electrician), directly to a Remote Transformer, or Kable Lite Surface Transformer when the available junction box is not located directly above the run.

The center power feed can be used anywhere within the run and includes 12' field-cuttable softwire leads. Specify single or dual-feed. Specify dual-feed when using a dual-feed transformer.

Tech Lighting 700KP4C24 Single Feed Power Feed Canopy

700KP4C24 Kable Lite Power Feed Canopy 4" Round Single Feed

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote single-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside a standard junction box. The two leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add a pair of hardwire feeds (sold separately).

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700KP2C24 Single Feed Power Feed Canopy

700KP2C24B Kable Lite Power Feed Canopy 2" Square Single Feed Archive List Price

A single-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote single-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside our special 2" junction box. The two leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add a pair of hardwire feeds (sold separately).

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700KP4C424 Dual Feed Power Feed Canopy

700KP4C424B Kable Lite Power Feed Canopy 4" Round Dual Feed

A dual-feed canopy is mounted to a wall or ceiling adjacent to the Kable Lite run. It can be used anywhere in the run. It brings power to the Kable Lite run from a remote dual-feed transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside a standard 4" junction box. The four leads from the canopy are 24" long and can be cut and bent in the field. To drop the Kable Lite system farther down from the ceiling, add two pair of hardwire feeds (sold separately). Isolating connectors for bare cable are included to isolate power feeds from each other.

Finishes: Chrome, Satin Nickel or White

Tech Lighting 700PRC14C Power Feed Turnbuckles

700PRC14C Power Feed Turnbuckles Archive List Price

Pair of insulated slimline turnbuckles with power feed capability. Minimum cable separation: 2"; maximum cable run: twenty feet, unless reinforced.

Use the power feed turnbuckles to pipe power from a single feed remote transformer through an accessible wall or ceiling and terminate the run. Back of wall must be accessible.

Finishes: Chrome or Satin Nickel

Tech Lighting 700KPFSO Kable Lite Power Feed Stand-off

700KPFSO01C KL-Power Feed Standoff 1"
700KPFSO02C KL-Power Feed Standoff 2.5"
700KPFSO12C KL-Power Feed Standoff 12"

Pair of rigid standoffs with power feed capability. Minimum cable separation: 3.5".

Power feed standoffs bring power to the cables within the run. Ceiling must be accessible.

Finishes: Chrome or Satin Nickel

Tech Lighting 700HWD Hardwire Feeds

700HWD24 KL-Hardwire Feeds 24" pair
700HWD48 KL-Hardwire Feeds 48" pair
700HWD72 KL-Hardwire Feeds 72" pair
700HWD96 KL-Hardwire Feeds 96" pair

Lengths: 24", 48", 72", 96"

Pair of field-cuttable, hand bendable hardwire feeds to replace standard feeds. For dual-feed canopies and dual-feed surface transformers, order two pair.

Finishes: Chrome or Satin Nickel

Tech Lighting Kable Lite

Create your own artistic illusion of floating lights with Kable Lite. Integrated parallel, low-voltage cables virtually disappear when installed. Cable can be separated from 2" to 36".

Kable Lite is a unique system featuring parallel low-voltage cables that virtually disappear, creating the illusion of floating lights. Cables are tightened between two rigid surfaces and may span a distance of up to twenty feet without additional support. In lobbies, reception areas, lofts or other high-ceilinged spaces, Kable Lite provides unobtrusive, quality light. Cables may be installed from wall to wall at any height and you can create turns within a run by including supports.

Kable Lite incorporates two thin cables installed point-to-point that are unobtrusive and become nearly invisible in application to create the illusion of floating lights.

• Chrome and Satin Nickel mounting hardware available

• Great solution for high ceilings as Kable Lite can be installed at any Height. For areas with lower ceilings, Kable Lite helps make a space feel larger

• Compatible fixtures include decorative pendants, architectural heads and functional art