Hadco DL1 Aluminum Tree Light - Hadco Pendants

Housing: Cast aluminum top cap with aluminum body and 5-ft stainless suspension cable. Fasteners are 300 Series stainless steel.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B-117-64 and ANSI/ASTM G53-77 specifications.

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable. Electrical Assembly: Single contact bayonet (S-8). 12 Volt fixture is pre-wired with 8-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.
Height: 7 1/4" (184mm)
Width: 2 1/2" (64mm)

Hadco LED Aluminum Downlyte DRL1 Low Voltage Accent Tree Light - Hadco Pendants

HOUSING: Cast aluminum top cap with aluminum body and 5-ft stainless suspension cable. Fasteners are 300 series stainless steel.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.
OPTICAL ASSEMBLY: Clear tempered glass lens.

Lamping: 4W lamp with 24° beam spread. 30,000 hours life. Color temperature (CCT): warm white (2,700K nominal). No Mercury. 7W lamp with 15°, 24°, or 36° beam spread. 25,000 hours life. Color temperature (CCT): cool white (4,000K nominal) or warm white (2,700K nominal). No Mercury.
ELECTRICAL ASSEMBLY: Bi-pin socket type (GU5.3) with 250° C high temperature teflon coated wire leads. 12 volt fixture is pre-wired with 6-ft. pigtail of 18-2 AWG, 105° C, SPT-1W wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.
WARRANTY: Three-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 6 1/16" (154mm)
Width: 2 13/16" (71mm)
Max. Weight: 1.2 lb

Finish: A Black, G Verde

Source/Lumens
LED7 7W LED *3
LED4 4W LED *2

Optics
FL Flood
SP Spot
NF Narrow Flood
CCT
W Warm
C Cool

*1 Fixture will be shipped with lamp installed. Lamp not sold separately.
*2 4W LED only available in (W) Warm CCT and (NF) narrow flood optics.
*3 7W cool (4,000K) LED only available in (NF) narrow flood and (FL) flood optics.

Hadco LED Aluminum Downlyte DRL1D Low Voltage Accent Tree Light - Hadco Pendants

HOUSING: Cast aluminum top cap with aluminum body and 5-ft stainless suspension cable. Fasteners are 300 series stainless steel.

Finish: Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Laboratory tested for superior weatherability and fade resistance in accordance with ASTM B117 specifications.
OPTICAL ASSEMBLY: Clear tempered glass lens.

Lamping: 3,000K or 4,000K color temperature (CCT). Approximately 50,000 hours of operational life (at 25°C ambient temp. and 70% lumen maintenance).
ELECTRICAL ASSEMBLY: Input voltage range (VAC): 10 - 14. Input frequency: 60Hz. (magnetic low voltage transformer required). Integral surge protector built into LED driver circuit. 12 volts, 3.8 total watts consumed (high wattage) or 2.4 total watts consumed (low wattage). 12 Volt fixture is pre-wired with 8-ft pigtail of 18-2 AWG, 105° C, SPT-1W wire.
IP RATING: IP66: Dust-tight and sealed against direct jets of water.
WARRANTY: Five-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2008 Standards.

Height : 6 1/16" (154mm)
Width: 2 13/16" (71mm)
Max. Weight: 1.2 lb

CCT
C2 Cool Low Power (2.4 total watts)
C3 Cool High Power (3.8 total watts)
W2 Warm Low Power (2.4 total watts)
W3 Warm High Power (3.8 total watts)

Finish
A Black
G Verde

Hadco GAHL1 Low Voltage Copper Hanging Light DownLyte

GAHL1-AC Antique Copper

GAHL1-AC Small Copper Hanging Downlyte w/Lamp 12v 27W 1156 Copper Quick Ship

Housing: Housing is a hand-formed solid copper with hand-punched holes for decorative element: annealed for strength. 12" hanging kit included, hooked at both ends for easy attachment to support ring and optional hanging chain (supplied by others).

Finish: Antique Copper (AC) is a hand-applied dark copper patina.

Lamping: 27W maximum S-8 (1156) lamp. Lamp is included with fixture. Lower wattage lamps are acceptable.

Electrical Assembly: Single contact bayonet (S-8). 12 volt fixture is pre-wired with 6-ft. Pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included.

WARRANTY: Ten-year limited warranty.
CERTIFICATIONS: ETL listed to U.S. safety standards for wet locations. cETL listed to Canadian safety standards for wet locations. Manufactured to ISO 9001: 2000 Standards.

Height: 4 7/16" (113mm)
Width: 3 13/16" (97mm)