Light Rope & Tape Light Under Counter, Task & Display
Mini Recessed & Pucks Linear Task Lights Flexible Light Strip Light Rope & Tape Light Mini Recessed NSL Collections
Under Counter and Task Step & Wall Lights Landscape & Architectural NSL Specialty Lighting Effects NSL Indoor/Outdoor Lighting

NSL LED eStrip

LED eStrip as step and rail lighting

LED eStrip is perfect for soffits
(LED Task Star shown under cabinet)

NSL LED eStrip

LES , per foot
Field cuttable every 6"
Accessories, drivers and mounting sold separately

Complete LED 6mm x 12mm PVC light strip uses LEDs spaced every inch for .96 watts per foot. LEDs are mounted to Flexible Printed Circuit Board technology and extruded in a flexible light strip crushproof to 100 PSI.

Safe 24 volt remote power supply powers 90 feet per single run.

Warm White, Cool White , Red, Blue, Amber or Green LEDs

UL listed Indoor & Outdoor to new tough UL 2388 standards.
Dimmable!

Optional LED eStrip Reflector increases light output over 50%.
Finish: Polished Brass, Bright Aluminum, Gloss White, Gloss Black

LED eStrip Fascia Extrusion shields LED eStrip from view while reflecting light toward appropriate surface.
Finish: Bright Aluminum, Gloss White

NSL LED eStrip

LEDs mounted to Flexible Printed Circuit Board technology and extruded in a 6mm x 12mm PVC light strip. Crush proof to 100 psi. LEDs consume only 0.96 watts per foot. Field cuttable every 6" and reconnectable with user installed male and female connectors. Optional molded "+", "T" and "L" connectors are available. Safe, Class 2 LED Drivers power up to 90 feet of product in a single run. ETL listed for indoor and outdoor applications. Offered in six LED colors.

Applications

  • Ceiling Coves
  • Stairs
  • Rails
  • Decks
  • Soffits
  • Eaves
  • Visual Merchandising
  • Exhibit Projects
  • Theatrical Projects

Features:

  • Available in Warm White, Cool White, Blue, Red, Green, Amber
  • "+", "T" and "L" connectors available
  • Maximum single run of 90 feet
  • 0.96 watts per foot
  • Safe 24VDC Class 2 Power Supplies
  • Dimmable
  • CL2 and burial cords
  • 1" LED spacing
  • Cuttable and reconnectable every 6"
  • 6mm x 12mm PVC covering flexible printed circuit board
  • Indoor and outdoor applications

Above: Brite Strip in Fascia Extrusion to light work station.
Below: Brite Strip in Fascia Extrusion lights display cabinet.

NSL LED eStrip Fascia Extrusion

Combines with Brite Strip, LED Brite Strip, or LED eStrip to create a versatile linear light fixture that is easily attached to almost any surface.

Each extrusion ships completely pre-assembled and ready to affix to mounting surface, just snap in seleced Brite Strip, LED Brite Strip, or LED eStrip. Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8".

Applications

  • Cabinets
  • Shelves
  • Display Accents
  • Any soft reflective light application

Features

  • Custom profile shields Brite Strip, LED Brite Strip, or LED eStrip from view while reflecting light toward appropriate surface
  • Sold in three colors: Aluminum, Bronze and White
  • Aluminum offers the greatest reflectivity
  • White acts like a primer to allow on-site custom paint matching
  • "Tru-form" PVC mounting channel and 3M double-sided tap included with every section
  • Sold in 4 foot lengths. Custom cuts for pieces less than 4 feet available

LED eStrip Fascia Extrusion

Ships completely pre-assembled and ready to affix to mounting surface, just snap in selected Brite Strip, LED Brite Strip, or LED eStrip.
Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8". Sold in 4' sections. Custom cuts available. Can be used as an accessory with LED eStrip.

Above: Light Rope in Reflector above cabinets.
Below: Light Rope in Reflector below bar.

NSL LED eStrip Reflector

Soft, warm illumination - increases light output over 50%

Each extrusion ships completely pre-assembled and ready to affix to mounting surface. Components include anodized aluminum extrusion, 3M double-sided mounting tape and either 1/2" or 3/8" clear polycarbonate Tru-Form Channel. Please specify either 1/2" or 3/8".

Applications

  • Cove lighting
  • Cabinets
  • Counters
  • Shelves
  • Displays
  • Eaves
  • Tables

Features

  • Polished brass adds a "golden" tone to reflected light
  • Bright aluminum gives maximum reflected light
  • Reflectors can be used with either 3/8" or 1/2" diameter Light Rope. Please specify with order
  • Sold in 4 foot lengths only. Custom cutting for pieces less than 4 feet available
  • Available for Brite Strip, LED Brite Strip, or LED eStrip

LED eStrip Reflector Extrusion

Extrusion with 3M doubled-sided tape applied to back. Ready to mount & attach Brite Strip to. Does not include any Brite Strip or accessories.

BLF-4-BA, BLF-4-PB BLF-4-GW, BLF-4-GB
PB=Polished Brass, BA=Bright Aluminum, GW=Gloss White, GB=Gloss Black

Sold in 4' lengths only. Custom cutting for pieces less than 4' available at no charge.

NSL LED eStrip Cove Reflector

One-step solution to mounting cove molding and lighting.

Ships without double-sided tape as screws or drywall anchors will work better with this reflector. Once you have mounted reflector, just attach LED eStrip, Brite Strip or Light Rope in the center of pre-engineered reflector section.

Application

  • Cove lighting

Features

  • An aluminum extrusion in the shape of a standard cove molding, with a white gloss mounting area for the illumination system.
  • Pre-engineered with appropriate bulb side clearances.
  • Pre-primed in white for ease of wall match painting and interior reflective qualities.
  • Cove reflector can be used with Brite Strip or LED Brite Strip for the brightest illumination, LED eStrip or Light Rope for a more subtle illumination.
  • Sold in 4 foot lengths only. Custom cutting for pieces less than 4 feet available.

LED eStrip Cove Reflector

Sold only in 4' lengths. Custom cutting available at no charge.
Does not include any Brite Strip, LED eStrip or Light Rope accessories.

This chart is better viewed on a desktop computer or by turning your screen horizontal.
Custom Cuts Cutable Every 6" (Cuts available from 0.5' to 90')
WW=Warm White, CW=Cool White, GR=Green, AM=Amber, BL=Blue, RD=Red
LES-XX-WW LED eStrip, Custom Cut, Warm White
LES-XX-CW LED eStrip, Custom Cut, Cool White
LES-XX-GR LED eStrip, Custom Cut, Green
LES-XX-AM LED eStrip, Custom Cut, Amber
LES-XX-BL LED eStrip, Custom Cut, Blue
LES-XX-RD LED eStrip, Custom Cut, Red
Each custom cut of LED eStrip requires a power cord and end cap (see Accessories and Drivers below).
LED eStrip REQUIRES use of NSL LED Driver models (see LED eStrip Drivers below).
90' Spools

WW=Warm White, CW=Cool White, GR=Green, AM=Amber, BL=Blue, RD=Red
LES-90-WW LED eStrip, 90' spool, Warm White
LES-90-CW LED eStrip, 90' spool, Cool White
LES-90-GR LED eStrip, 90' spool, Green
LES-90-AM LED eStrip, 90' spool, Amber
LES-90-BL LED eStrip, 90' spool, Blue
LES-90-RD LED eStrip, 90' spool, Red
Accessories, drivers and mounting sold separately (see below).
LED eStrip REQUIRES use of NSL LED Driver models (see LED eStrip Drivers below).
LED eStrip Accessories  
LES-001-6BR 6' Outdoor Burial Power Cord
LES-001-6CL 6' Indoor CL2 Power Cord
LES-001-12BR 12' Outdoor Burial Power Cord
LES-001-12CL 12' Indoor CL2 Power Cord
LES-002 Male & Female In-Line Connector Set (2/bag)
LES-003-2 Push-On Female End Cap (2/bag)
LES-003-3 Molded Female End Cap (2/bag)
Mounting Options    
LES-005 Nail Clips (30 per bag)
LES-008 Saddle Mounts with Tie Wraps (30 per bag)
LES-010 4' Plastic Mounting Channel
LES-010-T 4' Plastic Mounting Channel with Double-Sided Tape Installed
LES-010-S 4' Plastic Mounting Channel pre-drilled w/ 3 flathead screws & holes
Molded Connectors All molded connectors ship with required male or female fittings to attach to LED eStrip.
LES-BFTD "T" Type Connector - Bottom Connector
LES-BFTR "T" Type Connector - Left/Right Connector
LES-BFLN "L" Type Connector
LES-BFXN "+" Type Connector
LES-STP-2BR 2' Outdoor Burial Step Cord
LES-STP-2CL 2' Indoor CL2 Step Cord
LES-STP-12BR 12' Outdoor Burial Step Cord
LES-STP-12CL 12' Indoor CL2 Step Cord
LED eStrip Drivers
LES-24-65W 24VDC, 65W, Class 2 LED Driver, indoor only, plug-in, includes LED eStrip molded connector on secondary cord. Powers 1-65 feet of LED eStrip. NON DIMMABLE. 4.5" (L) x 2.1" (W) x 1.5" (H)
LEDDR-24-120W 24VDC, 120W, Class 2 Hardwire LED Driver, 2 circuits at 60W each.
RU Listed for indoor and outdoor usage. Includes 18AWG waterproof strain relief. For use with LED eStrip, LED Mini Star and LED Brite Strip.
11.6" (L) x 3.6" (W) x 2.25" (H).
TR24L20DC 24VDC, 20 watt, DIMMABLE magnetic transformer. Hard wire connection only. Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part #ED-LV/W or I-480). Powers and dims 8-20 feet of LED eStrip. Includes listed secondary 18AWG waterproof strain relief. 6.6" (L) x 3.75" (W) x 2.3" (H)
TR24L40DC 24VDC, 40 watt, DIMMABLE magnetic transformer. Hard wire connection only. Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part #ED-LV/W or I-480). Powers and dims 18-40feet of LED eStrip. Includes listed secondary 18AWG waterproof strain relief. 6.6" (L) x 3.75" (W) x 2.3" (H)
TR24L60DC 24VDC, 60 watt, DIMMABLE magnetic transformer. Hard wire connection only. Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part #ED-LV/W or I-480). Powers and dims 28-60 feet of LED eStrip. Includes listed secondary 18AWG waterproof strain relief. 6.6" (L) x 3.75" (W) x 2.3" (H)
TR24L96DC 24VDC, 96 watt, DIMMABLE magnetic transformer. Hard wire connection only. Requires Low Voltage Magnetic Dimmer on primary before device (NSL Part #ED-LV/W or I-480). Powers and dims 48-90 feet of LED eStrip. Includes listed secondary 18AWG waterproof strain relief. 6.6" (L) x 3.75" (W) x 2.3" (H)
Min # of Feet Max # of Feet
TR24L20DC 8 20
TR24L40DC 18 40
TR24L60DC 28 60
TR24L96DC 48 90

Wiring

LED eStrip Cabinet Wiring

LED eStrip Cabinet Wiring

CL2 wire allows thru-wall penetration for optimal remote Class 2 Power Supply installation



LED eStrip Burial Wiring

LED eStrip Burial Wiring

Burial wire allows outdoor in-ground use for optimal remote Class 2 Power Supply installation

This chart is better viewed on a desktop computer or by turning your screen horizontal.
  Dimmable Non-Dimming Min.
Feet		 Max.
Feet
LES-24-65W
(Indoor only)		   Non-Dimming 1 65
LEDDR-24-120W   Non-Dimming 1 120
TR24L20DC Dimmable or Non-Dimming 8 20
TR24L40DC Dimmable or Non-Dimming 18 40
TR24L60DC Dimmable or Non-Dimming 28 60
TR24L96DC Dimmable or Non-Dimming 48 90

If you do not wish to dim the LED eStrip use any of the LED Drivers listed above and be careful to abide by the minimum and maximum load values listed above.

If you wish to dim the LED eStrip, use only the TR24L20DC, TR24L40DC, TR24L60DC, or TR24L96DC and a magnetic low voltage dimmer listed below. All dimmable LED Drivers have no minimum load when used with an appropriate dimmer, however, all dimmable LED Drivers are more efficient if specified as per the minimum and maximum load values listed above.

Our 24 Volt Direct Current dimmable LED magnetic power supplies are designed to work with most 'stand alone' low voltage magnetic analog dimmers.

Recommended dimmers:

  • LUTRON "Ariadni" AYLV-600PH
  • LUTRON "Skylark" SLV-600P
  • LUTRON "Diva" DVLV-600PH
  • LUTRON "Glyder" GLV-600

Carefully following the dimmer instructions, dimmable LED magnetic power supply instructions and the NEC, wire dimmer between 120VAC power input and 24 Volt Direct Current dimmable LED power supply.
This chart is better viewed on a desktop computer or by turning your screen horizontal.

Specifications

  
Voltage 24VDC
Energy Usage 0.96 watts per foot
LED Life LEDs rated at 40,000 hours
Mounting Surface Temperature Limits -40F to +104F
LED Colors Warm White, Cool White, Blue, Red, Green, Amber
LED Color Temperature Warm White = 3000K +/- 200K, Cool White = 9000K +/- 200K
LED Spacing 1" on center
Profile 6 mm (height), 12 mm (width)
Maximum Single Run 90 feet
Cuttability Field cuttable every 6"
Connections User installed male and female connectors. Molded "+", "T" and "L" connectors. Molded extension cords. Indoor listed CL2 cords allow wire to be passed through Cabinets and Walls to/between Fixtures. Outdoor listed burial cords allow wire to be routed below grade to/between Fixtures. See instructions for details.
Dimming Dimmable with appropriate LED Magnetic Power Supply and dimmer. See instructions for details.
Agency Approval ETL Listed for indoor and outdoor Applications.
Warranty Two years.

Photometrics: Cove Application - LED

LED eStrip (Model # LES-3-WW 3 ft.)
Lumens = 166 l Watts = 2.88

 LED Brite Strip (Model # BLF-4-WW 2 ft)
Lumens = 200 l Watts = 4.16

Related Pages


Kichler Design Pro LED Disc 2.0
24 Volt DC Fully Dimmable LED!

WAC Lighting 4" Low Voltage, Line Voltage & LED Recessed Downlighting

NSL LED Brite Strip

As an Amazon Associate I earn from qualifying purchases.
Find out more >

Return to top of page

Indoor Lighting l Outdoor Lighting l Table, Floor & Desk Lamps l Kitchen, Recessed & Track Lighting l Fans
Site Map

Copyright © 2018 - 2024 design42 New Media Web Design. All rights reserved.


design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791