Step Lights, Mini Step Lights & Brick Lights >
NSL Xenon Brick Lights
Sized to replace a single standard brick. Self-contained, complete die cast aluminum recessed 120VAC step light, wall light or ceiling recessed fixture
XBL Xenon Brick Light , 9" x 2 3/8" Sized to replace a single standard brick.
XBL-L-SS Stainless Steel (Louver Only)
Xenon Brick Light uses only 18 watts.
Can be parallel wired ("daisy chained") up to 66 fixtures per 15A tap.
LBR LED Brick Star Brick Light , 9" x 2 3/8" Sized to replace a single standard brick.
LBR-L-WH-SS Stainless Steel (Louver Only)
LED Brick Star uses only 5.2 watts. Can be parallel wired ("daisy chained") up to 150 fixtures per circuit.
NSL LED Brick Star Brick Light >
Louver, Prism or Scoop Cover
White, Bronze, Black or Aluminum finish.
Stainless Steel Louver Cover available for use in corrosive environments, salt air or installed in limestone or other caustic materials.
Indoor or Outdoor.
Rated for Wet Location, Insulation Contact, Wall or Ceiling, Showers, Poured Concrete.
Dimmable!
NSL Xenon Brick Light with Bronze Louver Cover
NSL Xenon Brick Light
Die cast aluminum wall mount Xenon light fixture fits standard brick void and consumes 18 watts. 120VAC input and output of fixture up to 66 fixtures per 15A tap. 10,000 hour average Xenon bulb life of 2800K color temperature. Offered in three cover styles and five fixture finishes. UL listed Wet Location for all interior and exterior wall, ceilings and concrete pour applications. Dimmable with a low voltage electronic dimmer.
Applications
Features
Xenon Advantages
Colors & Cover Styles
Louver: White, Bronze, Aluminum and Black
Prism or Scoop Cover, Louver Cover, Stainless Steel Louver Cover
White, Bronze, Black or Aluminum finish
New! Stainless Steel Louver Cover
Recommended for use in corrosive environments as salt air, adjacent bodies of water, or installed in caustic materials such as limestone.
Three year warranty.
NSL Xenon Brick Light with White Prism Cover
NSL Xenon Brick Light with Aluminum Scoop Cover
| Xenon Brick Light | ||
|
XBL-L-(color) | Louver: White, Bronze, Aluminum and Black |
|
XBL-L-SS | Louver: Stainless Steel |
|
XBL-S-(color) | Scoop: White, Bronze, Aluminum and Black |
|
XBL-P-(color) | Prism: White, Bronze, Aluminum and Black |
 |
BL-CC | Brick Light Concrete Cap Concrete pour of NSL's XSL, XBL, XWL, LSL, LBL fixtures is now a snap with this well engineered accessory. |
| Replacement Bulb | ||
 |
XEN-12-18W |
12 volt, 18 watt Clear Xenon Replacement Bulb |
| Xenon Step Light | ||
|
XSL-L-(color) | Louver: White, Bronze, Aluminum and Black |
|
XSL-S-(color) | Scoop: White, Bronze, Aluminum and Black |
|
XSL-P-(color) | Prism: White, Bronze, Aluminum and Black |
 |
SL-CC | Step Light Concrete Cap Concrete pour of NSL's XSL, XBL, XWL, LSL, LBL fixtures is now a snap with this well engineered accessory. |
| Replacement Bulb | ||
|
XEN-12-18W |
12 volt, 18 watt Clear Xenon Replacement Bulb |
| Step Light Concrete Cap | ||
|
SL-CC | Step Light Concrete Cap Required for all concrete pour and brick wall applications |
Schematics
Assembly Schematic
WARNING! If this fixture is to be placed in a masonry or brick wall, you must use a Concrete Cap during can installation to provide the proper void for the fixture cover. Failure to use the Concrete Cap will almost guarantee concrete or grout forming against fixture can flange and poor cover-to-can seal (see below). Poor cover seal will allow water/moisture into fixture resulting in LED and Xenon failure.
Without Concrete Cap
Concrete or grout prevents cover from allowing a proper seal
Cap With Concrete Cap
Concrete form used during fixture can installation allows for proper void and good cover-to-can seal
Assembly, Reflector, Xenon Bulb and Cover
Interconnect up to 150 fixtures per 120VAC tap.
Dimensions
|
Cover | L | W | D |
| Louver | 9" | 3" | .75" | |
| Prism | 9" | 3" | .75" | |
| Scoop | 9" | 3" | .75" | |
| Can | 7.7" | 2.4" | 3.2" | |
| Hole | 7.7" | 2.4" | 3.2" |
Specifications |
|
| Voltage | 120VAC power input. Integral Class 2 12V transformer per fixture |
| Fixture Energy Rating | 120VAC, 150mA, 18 watts |
| Average Bulb Life | 10,000 hours |
| Color Temperature | 2800K +/- 200K |
| Cover Finish | White, Bronze, aluminum, black, stainless steel louver option |
| Can Finish | White with white reflector, fluorocarbon lacquer on stainless steel option |
| Construction | Both cover and can are die cast aluminum for corrosion protection, strength, weight and consistency of finish. New stainless steel louver option! |
| Lens | Frosted tempered glass |
| Wiring Options | 120V can be parallel wired ("daisy chained") up to 66 fixtures per 15A tap. Check local code and NEC for wiring selection |
| Dimming | Dimmable with an electronic low voltage dimmer on primary. |
| Agency Approval | UL listed Wet Location for all interior and exterior wall, ceiling and concrete pour applications. |
| Warranty | One year. |
Lower Wall Mount Application |
Fixture center 9" above floor | |||||||||||
| Grid Location: | A | A1 | A2 | B | B1 | B2 | C | C1 | C2 | D | D1 | D2 |
| Illuminance in Footcandles: | 0 | 0 | 0 | 4.5 | 1.8 | 0.4 | 1.9 | 1.3 | 0.5 | 0.8 | 0.6 | 0.4 |
design42 New Media Web Design
1804 Meadowbrook Terrace
Hendersonville NC 28791
